Laboratory for Dynamics of Machines and Structures 
Introduction of damping into flexible multibody belt-drive model
 G. Čepon, L.Manin and M. Boltežar
Journal of Sound and Vibration, Volume 324, Issues 1-2, 10 July 2009, Pages 283-296

http://dx.doi.org/10.1016/j.jsv.2009.02.001
Povzetek
In this paper the belt-drive model using an absolute nodal coordinate formulation is presented. Using this approach the damping forces are usually neglected and only the elastic forces are taken into account. The aim of this paper is to introduce a damping mechanism into the belt-drive model and to verify it against experimental data. Different damping mechanisms are proposed for the damping of the longitudinal and bending deformations and several experiments were conducted in order to obtain the damping properties. Good agreement between the numerical result and the experimentally obtained data was found. Finally, the applicability of the belt-drive model was presented in a comparison with the pinned–pinned beam model.
Authors

Izredni profesor

Gregor Čepon, dr.

  Ladisk, Fakulteta za strojništvo, Univerza v Ljubljani
  gregor.cepon@fs.uni-lj.si
  +386 1 4771 229
Scholar Home Xs

Assistant Professor

Lionel Manin, dr.

  Lamcos, INSA-Lyon
  lionel.manin@insa-lyon.fr
  

Profesor

Miha Boltežar, dr.

  Ladisk, Fakulteta za strojništvo, Univerza v Ljubljani
  miha.boltezar@fs.uni-lj.si
  +386 1 4771 608
Scholar Home Xs