Laboratory for Dynamics of Machines and Structures 
Dynamics of a belt-drive system using a linear complementarity problem for the belt–pulley contact description
 G. Čepon and M. Boltežar
Journal of Sound and Vibration, Volume 319, Issues 3–5, 23 January 2009, Pages 1019-1035

http://dx.doi.org/10.1016/j.jsv.2008.07.005
Povzetek
The aim of this study was to develop an efficient and realistic numerical model in order to predict the dynamic response of belt drives. The belt was modeled as a planar beam element based on an absolute nodal coordinate formulation. A viscoelastic material was adopted for the belt and the corresponding damping and stiffness matrices were determined. The belt–pulley contact was formulated as a linear complementarity problem together with a penalty method. This made it possible for us to accurately predict the contact forces, including the stick and slip zones between the belt and the pulley. The belt-drive model was verified by comparing it with the available analytical solutions. A good agreement was found. Finally, the applicability of the method was demonstrated by considering non-steady belt-drive operating conditions.
Authors

Profesor

Gregor Čepon, dr.

  Ladisk, Fakulteta za strojništvo, Univerza v Ljubljani
  gregor.cepon@fs.uni-lj.si
  +386 1 4771 229
Scholar Home Xs

Profesor

Miha Boltežar, dr.

  Ladisk, Fakulteta za strojništvo, Univerza v Ljubljani
  miha.boltezar@fs.uni-lj.si
  +386 1 4771 608
Scholar Home Xs