Laboratory for Internal Combustion Engines and Electromobility

CONFERENCE PAPERS

2023

DU, Zhang Peng, KOFLER, Sandro, VOGLAR, Tit, KRAVOS, Andraž, VRLIĆ, Martin, JAKUBEK, Stefan, HAMETNER, Christoph. State-of-health observer for polymer electrolyte membrane fuel cells. In: CIGOLOTTI, Viviana (ed.), MARINO, Francesco (ed.). European fuel cells and hydrogen : EFC 2023 : Piero Lunghi Conference 2023 : September 13th-15th 2023, Capri, Italy : book of proceedings. Rome: ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic Development, 2023. Str. 174-175, ilustr. ISBN 978-88-8286-446-0. https://drive.google.com/file/d/1uHTwItt6QJhOoXNG27VRrjUIr3PDjXds/view. [COBISS.SI-ID 165453315]

KRAVOS, Andraž, KREGAR, Ambrož, KATRAŠNIK, Tomaž. Spatially resolved catalyst degradation in PEMFCs under repetitive start-up and shut-down operation. In: CIGOLOTTI, Viviana (ed.), MARINO, Francesco (ed.). European fuel cells and hydrogen : EFC 2023 : Piero Lunghi Conference 2023 : September 13th-15th 2023, Capri, Italy : book of proceedings. Rome: ENEA, Italian National Agency for New Technologies, Energy and Sustainable Economic Development, 2023. Str. 164-165, ilustr. ISBN 978-88-8286-446-0. https://drive.google.com/file/d/1uHTwItt6QJhOoXNG27VRrjUIr3PDjXds/view. [COBISS.SI-ID 165450499]

WURZENBERGER, Johann C., LECHNER, Christoph, CHEN, Chao, KOLMBAUER, Michael, MELE, Igor, KATRAŠNIK, Tomaž. Low frequency impedance spectroscopy – modeling study on the transferability of solid diffusion coefficients. SAE technical paper series, WCX SAE World Congress Experience, online. str. 1-17, ilustr. ISSN 0148-7191. https://www.sae.org/publications/technical-papers/content/2023-01-0505/, DOI: 10.4271/2023-01-0505. [COBISS.SI-ID 149159683]

KRAVOS, Andraž, KREGAR, Ambrož, KATRAŠNIK, Tomaž. Prediction and modelling of a proton exchange membrane fuel cells performance and degradation using multi-domain and multi-scale models. In: ModVal 2023 : 19th Symposium on Fuel Cell and Battery Modeling and Experimental Validation, 21 – 23 March 2023, Mercatorhalle-Duisburg, Germany : book of abstracts. Duisburg: Hydrogen and Fuel Cell Center, 2023. Str. 139. https://zbt.de/fileadmin/user_upload/01-aktuell/01-thema-des-monats/2023/modval2023-book-of-abstracts-online.pdf. [COBISS.SI-ID 147120387]

2022

KREGAR, Ambrož, KRAVOS, Andraž, KATRAŠNIK, Tomaž. Unified model of hydrogen peroxide production and transport in LT-fuel cell membrane-electrode assembly. In: HACKER, Viktor (ed.), GOLLAS, Bernhard (ed.). 8th Regional Symposium on Electrochemistry of South-East Europe together with the 9th Kurt Schwabe Symposium : Graz University of Technology, 11-15 July 2022 : [book of abstracts]. Graz: Verlag der Technischen Universität, 2022. Str. 73-74, ilustr. ISBN 978-3-85125-907-0. https://openlib.tugraz.at/8th-regional-symposium-on-electrochemistry-of-south-east-europe-together-with-the-9th-kurt-schwabe-symposium-graz-university-of-technology-11-15-july-2022-2022. [COBISS.SI-ID 133038083]

KREGAR, Ambrož, KRAVOS, Andraž, KATRAŠNIK, Tomaž. Mathematical model of hydrogen peroxide production in anode, cathode, and membrane of LT-PEMFC. In: I03 : Materials for Low Temperature Electrochemical Systems 8 : 241st ECS Meeting, May 29, 2022 – June 2, 2022, Vancouver, Canada. [Pennington (NJ)]: Electrochemical Society, 2022. Vol. ma2022-01, nr. 35, f. [1]. ECS Meeting Abstracts, Vol. MA2022-01. ISSN 2151-2043. https://iopscience.iop.org/article/10.1149/MA2022-01351524mtgabs, DOI: 10.1149/MA2022-01351524mtgabs. [COBISS.SI-ID 133343747]

KREGAR, Ambrož, KRAVOS, Andraž, KATRAŠNIK, Tomaž. Poenoten model transporta plinov in nastajanja vodikovega peroksida v membransko-elektrodnem sklopu nizko-temperaturne vodikove gorivne celice. V: GOLOBIČ, Iztok (ur.). Akademija strojništva 2022 : inženirstvo – inovativne rešitve za trajnostni razvoj in samooskrbo, Ljubljana, 23. november 2022 : [11. mednarodna konferenca]. Ljubljana: Zveza strojnih inženirjev Slovenije – ZSIS, 2022. Letn. 11, št. 3/6, str. 104-105, ilustr. Svet strojništva, letn. 11, št. 3/6. ISSN 1855-6493. https://www.zveza-zsis.si/2022/11/22/svet-strojnistva-akademija-strojnistva-2022/. [COBISS.SI-ID 132958979]

KRAVOS, Andraž, KREGAR, Ambrož, KATRAŠNIK, Tomaž. Napovedovanje in modeliranje zmogljivosti ter staranja gorivnih celic s protonsko izmenjevalno membrano ob ponavljajočih se zagonih in zaustavitvah. V: GOLOBIČ, Iztok (ur.). Akademija strojništva 2022 : inženirstvo – inovativne rešitve za trajnostni razvoj in samooskrbo, Ljubljana, 23. november 2022 : [11. mednarodna konferenca]. Ljubljana: Zveza strojnih inženirjev Slovenije – ZSIS, 2022. Letn. 11, št. 3/6, str. 120-121, ilustr. Svet strojništva, letn. 11, št. 3/6. ISSN 1855-6493. https://www.zveza-zsis.si/2022/11/22/svet-strojnistva-akademija-strojnistva-2022/. [COBISS.SI-ID 132404483]

WURZENBERGER, Johann C., LECHNER, Christoph, JELOVIĆ, Mario, MELE, Igor, KATRAŠNIK, Tomaž. Fast charging at cold conditions-model-based control enabled by multi-scale multi-domain plant model. SAE technical paper series, SAE WCX Digital Summit, April 13-15, 2021, online. str. 1- 17, ilustr. ISSN 0148-7191. https://www.sae.org/publications/technical-papers/content/2022-01-0702/, DOI: 10.4271/2022-01-0702. [COBISS.SI-ID 119303683]

FAUSSONE, Gian Claudio, SELJAK, Tine, KATRAŠNIK, Tomaž, ŽVAR BAŠKOVIČ, Urban, JASIUKAITYTE, Edita, GRILC, Miha. Pyrolysis oil from post-consumer packaging and its aging: physical and chemical properties and drop-in performance in a diesel engine. In: 5th South East European Conference n Sustainable Development of Energy, Water and Environment Systems : [22-26 May, Vlorë, Albania]. [S. l.: SDEWES], 2022. Str. 1-24, ilustr. https://registration.sdewes.org/SEE2022/virtcon/. [COBISS.SI-ID 112443395]

ŽNIDARČIČ, Anton, POBERŽNIK, Mojca, LOBNIK, Aleksandra, KATRAŠNIK, Tomaž, SIVKA, Urška, VERANOVSKI, Anja, SELJAK, Tine. Characterization of solid residue obtained after enzymatic hydrolysis of textile waste. In: POTRČ, Sanja (ed.), et al. 5th International Conference on Technologies & Business Models for Circular Economy, [September 12th to September 14th 2022, Portorož, Slovenia] : book of abstracts. Maribor: University of Maribor, University Press: Faculty of Chemistry and Chemical Engineering, 2022. Str. [175]-177. ISBN 978-961-286-646-4. https://press.um.si/index.php/ump/catalog/view/714/975/2474-1. [COBISS.SI-ID 121708035]

2021

SELJAK, Tine, ŽVAR BAŠKOVIČ, Urban, ROSEC, Žiga, KATRAŠNIK, Tomaž. Spatially selective EGR – a novel approach for heat release control in continuous combustion. In: BAN, Marko (ed.). 16th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems : 10 – 15 October 2021, Dubrovnik, Croatia. Zagreb: Faculty of Mechanical Engineering and Naval Architecture: SDEWES.org, 2021. F. 1-24, ilustr. [COBISS.SI-ID 86042627]

KRAVOS, Andraž, KATRAŠNIK, Tomaž. Thermodynamically consistent reduced dimensionality multi-species electrochemical model for solid oxide fuel cell performance modelling, control and digital twin. In: BAN, Marko (ed.). 16th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems : 10 – 15 October 2021, Dubrovnik, Croatia. Zagreb: Faculty of Mechanical Engineering and Naval Architecture: SDEWES.org, 2021. F. 1-19, ilustr. [COBISS.SI-ID 82287363]

ŽNIDARČIČ, Anton, KATRAŠNIK, Tomaž, SELJAK, Tine. Innovative virtual design and experimental characterisation of a small scale sewage sludge incineration system. V: BAN, Marko (ur.). 16th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems : 10 – 15 October 2021, Dubrovnik, Croatia. Zagreb: Faculty of Mechanical Engineering and Naval Architecture: SDEWES.org. 2021, f. 1-23, ilustr. [COBISS.SI-ID 82231555]

WURZENBERGER, Johann C., JELOVIĆ, Mario, ŠIMUNDIĆ, Mate, MELE, Igor, KATRAŠNIK, Tomaž. Battery thermal management simulation : 1D+1D electrochemical battery and 3D module modeling on vehicle system level. SAE technical paper series, SAE WCX Digital Summit, April 13-15, 2021, online. str. 1- 15, ilustr. ISSN 0148-7191. https://www.sae.org/publications/technical-papers/content/2021-01-0757/, DOI: 10.4271/2021-01-0757. [COBISS.SI-ID 58426883]

2020

ŽNIDARČIČ, Anton, KATRAŠNIK, Tomaž. Analiza prestopa toplote v različnih tokovnih režimih znotraj zračnih rež elektro motorjev s 3D CFD simulacijami = Analysis of convective heat transfer inside an electric motor air gap at different flow conditions using 3D CFD simulations. In: SLAVIČ, Janko (ed.), ČESNIK, Martin (ed.). Kuhljevi dnevi 2020 : zbornik del : spletna izvedba, 24.-25. september 2020. Ljubljana: Slovensko društvo za mehaniko, 2020. Str. 227-235, ilustr. ISBN 978-961-93859-5-1. http://www.drustvozamehaniko.si/zbornik/ZbornikKD2020.pdf. [COBISS.SI-ID 33073155]

WURZENBERGER, Johann C., GLATZ, Thomas, RAŠIĆ, Davor, TAVČAR, Gregor, MELE, Igor, KREGAR, Ambrož, KATRAŠNIK, Tomaž. FCEV simulation – Electrochemical battery and fuel cell models on vehicle level. In: BARGENDE, Michael (ed.), REUSS, Hans-Christian (ed.), WAGNER, Andreas. 20. Internationales Stuttgarter Symposium : Automobil- und Motorentechnik. Bd. 2. 1. Aufl. Wiesbaden: Springer Vieweg, 2020. Str. 219-233, ilustr. Proceedings. ISBN 978-3-658-30994-7, ISBN 978-3-658-30995-4. ISSN 2198-7432. https://link.springer.com/chapter/10.1007%2F978-3-658-30995-4_24, DOI: 10.1007/978-3-658-30995-4_24. [COBISS.SI-ID 27868419]

ŽNIDARČIČ, Anton, KATRAŠNIK, Tomaž, ZSÉLY, I. G., NAGY, T., TURÁNYI, Tamás, SELJAK, Tine. 3D CFD sewage sludge combustion model with reduced chemical kinetics mechanisms. In: SDEWES 4th SEE Conference Sarajevo 2020 : June 28-July 02, 2020, : Sarajevo, Bosnia and Herzegovina. [S. l.: SDEWES.ORG], 2020. F. 1-22, ilustr. http://registration.sdewes.org/SEE2020/virtcon/?pr=2edb85b4b2942a5e4e50c56b25bc0d74. [COBISS.SI-ID 25573891]

WURZENBERGER, Johann C., RAŠIĆ, Davor, TAVČAR, Gregor, GLATZ, Thomas, MELE, Igor, KATRAŠNIK, Tomaž. FCEV performance assessment – electrochemical fuel cell and battery modelling on vehicle level. SAE technical paper series. 2020, str. 1-19, ilustr. ISSN 0148-7191. DOI: 10.4271/2020-01-0857. [COBISS.SI-ID 17163035]

POETSCH, Christoph, WURZENBERGER, Johann C., KATRAŠNIK, Tomaž. A real-time capable and modular modeling concept for virtual SI engine development. SAE technical paper series. 2020, str. 1-17, ilustr. ISSN 0148-7191. DOI: 10.4271/2020-01-0577. [COBISS.SI-ID 17162779]

KRAVOS, Andraž, KREGAR, Ambrož, KATRAŠNIK, Tomaž. Hybrid methodology for efficient on the fly (re)parametrization of proton exchange membrane fuel cells electrochemical model for diagnostics and control applications. V: SWIDER-LYONS, K. (ur.). PRiME 2020 : Polymer Electrolyte Fuel Cells & Electrolyzers 20 (PEFC&E 20), (ECS transactions, ISSN 1938-5862, vol. 98, 9). Pennington: Electrochemical Society. 2020, vol. 98, no. 9, str. 13-24, ilustr. https://iopscience.iop.org/article/10.1149/09809.0013ecst, doi: 10.1149/09809.0013ecst. [COBISS.SI-ID 30901507]

2019

KATRAŠNIK, Tomaž, MELE, Igor, ZELIČ, Klemen. Advanced continuum Li-ion battery modelling framework. In: YAN, Jinyue (ed.). Proceedings of 11th International Conference on Applied Energy, Part 2, Sweden, 2019.Vol. 3. [S. l.: s. n.], 2019. Str.. 1-7, ilustr. http://www.energy-proceedings.org/wp-content/uploads/2020/02/679_Paper_0906040802.pdf. [COBISS.SI-ID 17159963]

KRAVOS, Andraž, RITZBERGER, D., TAVČAR, Gregor, HAMETNER, Christoph, JAKUBEK, Stefan, KATRAŠNIK, Tomaž. Parameter sensistivity analysis of a thermodynamically consistent electrochemiucal PEMFC model for virtual observers. In: CIGOLOTTI, Viviana (ed.). European Fuel Cell : conference & exhibition. 8th European Fuel Cell, Piero Lunghi Conference, Naples, 9-11 December, 2019. Rome: ENEA Italian National Agency for new technologies, energy and sustainable economic development, 2019. F. [303]-[304], ilustr. ISBN 978-88-8286-386-9. https://www.europeanfuelcell.it/media/book_of_proceedings_EFC19.pdf. [COBISS.SI-ID 17005851] [download PDF]

KREGAR, Ambrož, TAVČAR, Gregor, KRAVOS, Andraž, KATRAŠNIK, Tomaž. Predictive model for performance and platinum degradation simulation of high temperature PEM fuel cells in transient operating conditions. In: GASTEIGER, Hubert Andreas (ed.), BANDARENKA, Aliaksandr (ed.). EFCF 2019 : proceedings : low-temperature fuel cells, electrolysers & H [sub] 2 processing. Luzern: European fuel cell forum, 2019. F. 13, ilustr. ISBN 978-3-905592-24-5. https://old.efcf.com/uploads/media/Chapter-05_EFCF-2019_Sessions_B02-B11-B15_ISBN_01.pdf. [COBISS.SI-ID 17039387] [download PDF]

SELJAK, Tine, KATRAŠNIK, Tomaž. Advanced combustion concepts with highly oxygenated fuels in gas turbines. V: COSTA, Mário (ur.). Clean air 2019 : book of abstracts : programme included. 14th International Conference on Energy for a Clean Environment, September 8-12, 2019, Funchal, Madeira, Portugal. Lisboa: Instituto Superior Técnico, cop. 2019. Str. 43. [COBISS.SI-ID 16854811] [download PDF]

ŽVAR BAŠKOVIČ, Urban, SELJAK, Tine, KATRAŠNIK, Tomaž. Enhancing a RCCI combustion concept by exploiting unique properties of highly reactive waste-derived fuels. V: COSTA, Mário (ur.). Clean air 2019 : book of abstracts : programme included. 14th International Conference on Energy for a Clean Environment, September 8-12, 2019, Funchal, Madeira, Portugal. Lisboa: Instituto Superior Técnico, cop. 2019. Str. 48. [COBISS.SI-ID 16854555] [download PDF]

ŽNIDARČIČ, Anton, SELJAK, Tine, KATRAŠNIK, Tomaž. Innovative approach for improved modelling accuracy in case of 3D CFD sewage sludge combustion simulations. V: Proceedings, 1st International Conference on Smart Energy Carriers, 21-23 January 2019, Napoli, Italy. [S. l.: COST. 2019], f. 1-4, ilustr. http://www.smartcats.eu/1sticsec2019/#1548011420639-70c4f7d6-5071. [COBISS.SI-ID 16485403]

VUJANOVIĆ, Milan, JURIĆ, Filip, PETRANOVIĆ, Zvonimir, KATRAŠNIK, Tomaž, VIHAR, Rok, TATSCHL, Reinhard. Coupled experimental and numerical investigation of reactive spray processes in internal combustion engine. V: ECM2019, 9th European Combustion Meeting (ECM 2019), April 2019, Parque das Nações, Lisboa, Portugal. Lisboa: Instituto Superior Técnico. 2019, datoteka PDF/Poster Session 1/IC engines I/Paper_S1_AIII_57 (6 f.), ilustr. [COBISS.SI-ID 16593947]

ŽVAR BAŠKOVIČ, Urban, VIHAR, Rok, RODMAN OPREŠNIK, Samuel, KATRAŠNIK, Tomaž. Reactivity controlled compression ignition combustion using renewable fuels. V: ECM2019, 9th European Combustion Meeting (ECM 2019), April 2019, Parque das Nações, Lisboa, Portugal. Lisboa: Instituto Superior Técnico. 2019, datoteka PDF/Poster Session 3/IC engines II/Paper_S3_AII_29 (7 f.), ilustr. [COBISS.SI-ID 16594459]

ŽNIDARČIČ, Anton, KATRAŠNIK, Tomaž, SELJAK, Tine. Innovative 3D CFD sewage sludge combustion modeling for furnace design optimization. V: ECM2019, 9th European Combustion Meeting (ECM 2019), April 2019, Parque das Nações, Lisboa, Portugal. Lisboa: Instituto Superior Técnico. 2019, datoteka PDF/Poster Session 4/Solid fuels II/Paper_S4_AII_11 (6 f.), ilustr. [COBISS.SI-ID 16594203]

2018

KRAVOS, Andraž, KREGAR, Ambrož, TAVČAR, Gregor, KATRAŠNIK, Tomaž. Predictive virtual methodology for performance and platinum degradation modelling of PEM fuel cells in transient operating conditions. In: 4th International Workshop on Hydrogen and Fuel Cells, Graz, University of Technology, August 23rd, 2018. 4th International Workshop on Hydrogen and Fuel Cells, Graz, University of Technology, August 23rd, 2018. Graz: University of Technology, 2018. F. 25-26, ilustr. https://www.tugraz.at/fileadmin/user_upload/Institute/CEET/FC_Group/FC_Summer_School/2018/99_-_Abstract_Book_merged.pdf. [COBISS.SI-ID 16275483] [download PDF]

KREGAR, Ambrož, TAVČAR, Gregor, KRAVOS, Andraž, KATRAŠNIK, Tomaž. Predictive virtual modelling framework for performance and platinum degradation modelling of high temperature PEM fuel cells. Conference proceedings, 10th International Conference on Applied Energy (ICAE2018), August 22-25, 2018, Hong Kong, China

SELJAK, Tine, PAVALEC, Klemen, BUFFI, Marco, VALERA-MEDINA, Augustin, CHIARAMONTI, David, KATRAŠNIK, Tomaž. Challenges and solutions for utilization of bioliquids in microturbines. V: Proceedings of ASME Turbo Expo 2018 : TURBO EXPO, Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway. Oslo: ASME. 2018, f. 1-12, ilustr. http://gasturbinespower.asmedigitalcollection.asme.org/article.aspx?articleid=2700497. [COBISS.SI-ID 16242459]

2017

ŽVAR BAŠKOVIČ, Urban, VIHAR, Rok, KATRAŠNIK, Tomaž. Partially premixed combustion using high and low reactivity fuels. V: BAN, Marko (ur.). Digital proceedings, 12th Conference on Sustainable Development of Energy, Water and Environment Systems, October 4-8, 2017, Dubrovnik, Croatia. [Zagreb]: SDEWES. 2017, f. 1-18, ilustr. [COBISS.SI-ID 15714075]

JURIĆ, Filip, PETRANOVIĆ, Zvonimir, VUJANOVIĆ, Milan, KATRAŠNIK, Tomaž, VIHAR, Rok. Experimental and numerical investigation of combustion characteristics of a diesel engine. V: BAN, Marko (ur.). Digital proceedings, 12th Conference on Sustainable Development of Energy, Water and Environment Systems, October 4-8, 2017, Dubrovnik, Croatia. [Zagreb]: SDEWES. 2017, f. 1-21, ilustr. [COBISS.SI-ID 15714331]

SELJAK, Tine, KATRAŠNIK, Tomaž. Reduction of PM emissions by highly oxygenated viscous biofuel : use of glycerol in a micro gas turbine. V: KROPE, Jurij (ur.), et al. Renewable energy sources : (Conference proceedings). Maribor: University of Maribor Press: Faculty of chemistry and chemical engineering. 2017, str. [287]-301, ilustr. http://press.um.si/index.php/ump/catalog/view/252/214/437-1. [COBISS.SI-ID 15642139]

TAVČAR, Gregor, URTHALER, Peter, HEINZL, Christoph, LOCHER, Tim, KREGAR, Ambrož, KATRAŠNIK, Tomaž, TATSCHL, Reinhard. Real time startup simulation of a high temperature PEM fuel cell for combined heat and power generation. V: CERRI, Isotta (ur.). Proceedings of 6th European PEFC & Electrolyser Forum 2017 : 4 – 7 July 2017, Lucerne/Switzerland, (European fuel cell forum, 21). Luzern: European Fuel Cell Forum AG. 2017, datoteka Chapter-03_EFCF-2017_Sessions-A07-A11-A05-A12_ISBN.pdf (f. 127-135), ilustr. http://www.efcf.com/fileadmin/content/proceedings2017/Chapter-03_EFCF-2017_Sessions-A07-A11-A05-A12_ISBN.pdf. [COBISS.SI-ID 15606299]

TATSCHL, Reinhard, FINK, C., TAVČAR, Gregor, URTHALER, Peter, KATRAŠNIK, Tomaž. A Scalable PEM fuel cell modelling approach to support FCEV component and system development. V: EEVC 2017, 5th European Battery, Hybrid and Fuel Cell Electric Vehicle Congress, Geneva, 14 th – 16 th March 2017. Geneva: AAVC. 2017, f. 10, ilustr. http://www.eevc.eu/page/proceedings-2017/. [COBISS.SI-ID 15620635]

SELJAK, Tine, KATRAŠNIK, Tomaž. Glycerol combustion in a gas turbine : analysis of gaseous and particulate emissions. V: Digital proceedings, ECM 2017, 8th European Combustion Meeting, 18th to 21st of April 2017, Dubrovnik, Croatia. [S. l.: s. n.], 2017, f. 6, ilustr. [COBISS.SI-ID 15503899]

ŽVAR BAŠKOVIČ, Urban, VIHAR, Rok, SELJAK, Tine, DIMITRIADIS, Athanasios, BEZERGIANNI, Stella, KATRAŠNIK, Tomaž. Combustion and emission characterisation of innovative fuels in compression ignition engine : tire pyrolysis oil and hydrotreated vegetable oil. V: Digital proceedings, ECM 2017, 8th European Combustion Meeting, 18th to 21st of April 2017, Dubrovnik, Croatia. [S. l.: s. n.], 2017, f. 6, ilustr. [COBISS.SI-ID 15503387]

JURIĆ, Filip, PETRANOVIĆ, Zvonimir, VUJANOVIĆ, Milan, KATRAŠNIK, Tomaž, VIHAR, Rok. Numerical analyses of transient combustion process by using the Lagrangian discrete droplet method. V: Digital proceedings, ECM 2017, 8th European Combustion Meeting, 18th to 21st of April 2017, Dubrovnik, Croatia. [S. l.: s. n.], 2017, f. 7, ilustr. [COBISS.SI-ID 15503643]

2016

TAVČAR, Gregor, KATRAŠNIK, Tomaž. A mechanistically based real-time capable system level model of PEM fuel cells. V: FRANKOVIĆ, Bernard (ur.). Energija i okoliš 2016 : prilagodba klimatskim promjenama i energijska sigurnost na JI Europe – čista energija za bolji svijet = Energy and the environment 2016, Međunarodni kongres Energija i okoliš, Opatija, Croatia, October 26-28, 2016. Rijeka: Hrvatski savez za sunčevu energiju. 2016, str. 135-145, ilustr. [COBISS.SI-ID 15606555]

SELJAK, Tine, ČUK, Nataša, KUNAVER, Matjaž, KATRAŠNIK, Tomaž. Energy recovery from residue of nanocellulose production. V: Venice 2016, 6th International Symposium on Energy from Biomass and Waste, Venice, 14-17 November 2016. [Padova: Eurowaste SRL, 2016], f. [1-15], ilustr. [COBISS.SI-ID 15157019]

ŽVAR BAŠKOVIČ, Urban, VIHAR, Rok, SELJAK, Tine, KATRAŠNIK, Tomaž. Combustion and emission formation phenomena of tire pyrolysis oil in a common rail Diesel engine. V: BAN, Marko. Digital proceedings, 11th Conference on Sustainable Development of Energy, Water and Environment Systems, September 4-9, 2016, Lisbon, Portugal, (CD proceedings (Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems), ISSN 1847-7178). [Zagreb]: SDEWES, 2016, f. 1-28, ilustr. [COBISS.SI-ID 15155483]

POETSCH, Christoph, KATRAŠNIK, Tomaž. Crank-angle resolved modeling of fuel injection, combustion and emission formation for engine optimization and calibration on real-time systems : technical paper. V: SAE 2016 World Congress and Exhibition, April 12-14, 2016 Detroit, Michigan, USA. Warrendale: SAE, 2016, 19 f., ilustr. http://papers.sae.org/2016-01-0558/, doi: 10.4271/2016-01-0558. [COBISS.SI-ID 14784027]

ŽVAR BAŠKOVIČ, Urban, VIHAR, Rok, SELJAK, Tine, KATRAŠNIK, Tomaž. Feasibility analysis of 100% tire pyrolysis oil in a common rail Diesel engine. V: KITANOVSKI, Andrej (ur.), POREDOŠ, Alojz (ur.). Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems, June 19. – 23. 2016, Portorož, Slovenia. Ljubljana: Faculty of Mechanical Engineering, 2016, datoteka P535_Feasibility analysis … (19 f.), ilustr. [COBISS.SI-ID 14707739]

PFLUEGL, H., DIWOKY, Franz, BRUNNSTEINER, Bernhard, SCHLEMMER, E., OLOFSSON, Ylva, KATRAŠNIK, Tomaž, et al. ASTERICS : advanced simulation models and accelerated testing for the development of electric vehicles. V: RAFALSKI, Leszek (ur.), ZOFKA, Adam (ur.). Transport Research Arena TRA2016, (Transportation research procedia (Online), ISSN 2352-1465). [S. l.]: Elsevier, 2016, vol. 14, f. 3641-3650, ilustr. http://www.sciencedirect.com/science/article/pii/S2352146516304392, doi: 10.1016/j.trpro.2016.05.432. [COBISS.SI-ID 14710299]

2015

TAVČAR, Gregor, KATRAŠNIK, Tomaž. A computationally efficient hybrid 3D analytic-numerical approach for system level modelling of PEM fuel cells. V: BARBIR, Frano (ur.). 5th European PEFC & H2 Forum 2015, 30 June – 3 July 2015, Lucerne, Switzerland : proceedings, (European fuel cell forum, 19). Luzern: European Fuel Cell Forum AG, 2015, datoteka Chapter-05_EFCF-2015-Sessions-A08-A11-A12-A14 (f. 168-177), ilustr. [COBISS.SI-ID 14604059]

SELJAK, Tine, KATRAŠNIK, Tomaž. Technical feasibility analysis of innovative fuels. V: 1st General Meeting & Smart Energy Carriers for Power, Industry and Engines Workshop, Certh Conference Centre, Thessaloniki, Greece, 26-28 August 2015. SMARTCATS : CM1404 : proceedings. [S. l.: European Cooperation in Science and Technology – COST, 2015], datoteka SC01_023 (2 f.), ilustr. [COBISS.SI-ID 14266139]

SELJAK, Tine, ŠIROK, Brane, KATRAŠNIK, Tomaž. Combustion in microturbines : assessment of methodology and innovative solutions for utilization of alternative fuels. V: 10th Conference on Sustainable Development of Energy, Water and Environment Systems, September 27 – October 2, 2015, Dubrovnik, Croatia. BAN, Marko. SDEWES Conference : digital proceedings, (CD proceedings (Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems), ISSN 1847-7178). [Dubrovnik]: SDEWES, 2015, datoteka SDEWES2015_FP_438 (25 f.). [COBISS.SI-ID14256923]

KRAMMER, Johann, KATRAŠNIK, Tomaž. HIL compatible engine models for dual fuel applications. V: SIMEA 2015 : technology and connectivity improving mobility, (Blucher Engineering Proceedings, ISSN 2357-7592, Vol. 2, no. 1). [São Paulo: AEA, 2015], vol. 2, no. 1, f. [1-12], ilustr.http://pdf.blucher.com.br/engineeringproceedings/simea2015/PAP230.pdf, doi: 10.5151/engpro-simea2015-PAP230. [COBISS.SI-ID 14245659]

2014

OLOFSSON, Ylva, GROOT, Jens, KATRAŠNIK, Tomaž, TAVČAR, Gregor. Impedance spectroscopy characterisation of automotive NMC/graphite Li-ion cells aged with realistic PHEV load profile : quantification of cell properties vs. temperature at different stages of ageing. V: 2014 IEEE International Electric Vehicle Conference, Florence, Italy – December 17-19, 2014. IEVC2014 : conference proceedings. [S. l.]: Institute of Electrical and Electronics Engineers – IEEE, 2014, f. [1]-[6], ilustr. [COBISS.SI-ID 13866779]

SELJAK, Tine, KATRAŠNIK, Tomaž. Designing the microturbine engine for waste-derived fuels. V: 5th International Symposium on Energy from Biomass and Waste, Island of San Servolo, Venice, Italy, 17-20 November 2014. Venice 2014 : 5th International Symposium on Energy from Biomass and Waste, Island of San Servolo, Venice, Italy, 17-20 November 2014. [Padova: Eurowaste], 2014, f. 1-19, ilustr. [COBISS.SI-ID 13803547]

2013

KATRAŠNIK, Tomaž. Energy conversion efficiency and WtW CO2 emissions of a medium duty truck comparison of PHEV and ICEV powertrain topology. V: DUBOKA, Čedomir (ur.). Automotive Engineering for Improved Safety : proceedings, (JUMV-SP, 1301). Belgrade: JUMV – Yugoslav Society of Automotive Engineers, 2013, datoteka HEV06 (f. 293-311), ilustr. [COBISS.SI-ID 13359131]

SELJAK, Tine, RODMAN OPREŠNIK, Samuel, KUNAVER, Matjaž, KATRAŠNIK, Tomaž. Combustion properties of fuels obtained through pyrolysis and liquefaction of fossil and bio-based polymer materials. V: 6th International Conference on Sustainable Energy and environmental protection, SEEP 2013, 20th – 23rd of August 2013, Maribor. KROPE, Jurij (ur.), OLABI, Abdul Ghani (ur.), GORIČANEC, Darko (ur.). Conference proceedings. Maribor: Faculty of Chemistry and Chemical Engineering, 2013, str. 492-497, ilustr. [COBISS.SI-ID 13051675]

RODMAN OPREŠNIK, Samuel, SELJAK, Tine, VIHAR, Rok, KATRAŠNIK, Tomaž. Real-world emissions and vehicle parameters of different bus powertrain technologies. V: 6th International Conference on Sustainable Energy and environmental protection, SEEP 2013, 20th – 23rd of August 2013, Maribor. KROPE, Jurij (ur.), OLABI, Abdul Ghani (ur.), GORIČANEC, Darko (ur.). Conference proceedings. Maribor: Faculty of Chemistry and Chemical Engineering, 2013, str. 498-504, ilustr. [COBISS.SI-ID 13051931]

WURZENBERGER, Johann C., BANJAC, Titina, HEINZLE, Roman, KATRAŠNIK, Tomaž. Mechanistic modeling in system engineering : real-time capable simulation of a TGDI engine powered vehicle. V: Proceedings of the FISITA 2012 World Automotive Congress, 27-30 November, Beijing, China. Vol. 2, Advanced internal combustion engines, (Lecture Notes in Electrical Engineering,, Vol. 190). Berlin; Heidelberg: Springer, 2013, str. 1055-1067, ilustr., doi: 10.1007/978-3-642-33750-5_18. [COBISS.SI-ID 12677147]

WURZENBERGER, Johann C., HEINZLE, Roman, DEREGNAUCOURT, Maxime-Vianney, KATRAŠNIK, Tomaž. A comprehensive study on different system level engine simulation models : technical paper. V: SAE 2013 World Congress & Exhibition, April 16-18, 2013, Detroit, Michigan, USA. Warrendale: SAE, 2013, 7 f., ilustr., doi: 10.4271/2013-01-1116. [COBISS.SI-ID 13358875]

WURZENBERGER, Johann C., HEINZLE, Roman, BANJAC, Titina, KATRAŠNIK, Tomaž. Engine cold start simulation using system engineering models. V: The spark ignition engine of the future : exploring innovative concepts to meet future CO2 emissions and electrification challenges, December 4 & 5 2013 : international conference and exhibition : proceedings. Suresnes Cedex: SIA, 2013, datoteka 07_Wurzenberger_AVL (8 f.). [COBISS.SI-ID 13358363]

2012

WURZENBERGER, Johann C., HEINZLE, Roman, BANJAC, Titina, KATRAŠNIK, Tomaž. Fahrzeug Wärmemanagement Simulation unter Verwendung von mechanistischen System-Simulationsmodellen. V: 16. Kongress Berechnung, Simulation und Erprobung im Fahrzeugbau 2012, Baden-Baden, 20. und 21. November 2012, (VDI-Berichte, ISSN 0083-5560, 2169). Düsseldorf: VDI, 2012, str. 135-148, ilustr. [COBISS.SI-ID 12675099]

KATRAŠNIK, Tomaž, HEINZLE, Roman, WURZENBERGER, Johann C. Tailored cylinder models for system level engine modelling. V: E-COSM’12. Rueil-Malmaison: IFAC, 2012, str. 237-244, ilustr. [COBISS.SI-ID 12671259]

KATRAŠNIK, Tomaž, WURZENBERGER, Johann C. Coupled optimization of energy consumption and exhaust emissions of hybrid power trains – application of mechanistic system level simulations. V: XXIII. znanstveni skup o energiji i zaščiti okoliša, [Rujan 17.-18., 2012] = 23rd Scientific Conference on energy and the Environment, Opatija – Croatia, September 17-18, 2012. FRANKOVIĆ, Bernard (ur.). Energija i okoliš 2012 : međunarodni kongres = Energy and the environment 2012 : international congress. Rijeka: Hrvatski savez za sunčevu energiju: = Croatian solar energy association, 2012, str. 125-137, ilustr. http://bib.irb.hr/datoteka/596369.EE12-zbornik.pdf. [COBISS.SI-ID12575003]

SELJAK, Tine, RODMAN OPREŠNIK, Samuel, KUNAVER, Matjaž, KATRAŠNIK, Tomaž. Combustion performance of liquefied lignocellulosic material in a laboratory scale gas turbine. V: International Conference on Applied Energy, July 5-8, 2012, Suzhou, China. Energy innovations for a sustainable world. Beijing: CICCST, cop. 2012, str. 3587-3594, ilustr. [COBISS.SI-ID 12430363]

KRAMMER, Johann, WURZENBERGER, Johann C., BARDUBITZKI, Sophie, KATRAŠNIK, Tomaž. Concept design of hybrid power trains by means of physical based simulation models. V: JSAE Annual Congress, Pacifico Yokohama, 23-25 May 2012. Proceedings. [S. l.]: Society of Automotive Engineers of Japan, 2012, str. [1-4], ilustr.http://www.bookpark.ne.jp/cm/jsae/particulars_e.asp?content_id=JSAE-20125100-PDF. [COBISS.SI-ID 12394779]

WURZENBERGER, Johann C., PRAH, Ivo, TOMINC, Primož, KATRAŠNIK, Tomaž. Optimization of hybrid power trains-physical based modeling for concept design. V: SAE 2012 World Congress & Exhibition, April 2012, Detroit, MI, USA. SAE 2012 World Congress & Exhibition Technical Papers. Warrendale: Society of Automotive Engineers: = SAE, 2012, [5] str., doi: 10.4271/2012-01-0359. [COBISS.SI-ID 12345627]

KATRAŠNIK, Tomaž, HEINZLE, Roman, WURZENBERGER, Johann C. Detailed engine and vehicle plant model to support ecu calibration. V: Testing, mapping and calibration. West Yorkshire: University of Bradford, 2012, str. 1-10, ilustr. [COBISS.SI-ID 12672283]

RODMAN OPREŠNIK, Samuel, SELJAK, Tine, KATRAŠNIK, Tomaž. Vpliv goriv na emisije škodljivih snovi in emisijo CO2 osebnega vozila. V: 10. konferenca in razstava Inovativna avtomobilska tehnologija, Novo Mesto, 2012. FAJDIGA, Matija (ur.), KLEMENC, Jernej (ur.). Zbornik referatov. Ljubljana: Fakulteta za strojništvo, Laboratorij LAVEK, cop. 2012, str. 485-496, ilustr. [COBISS.SI-ID 12277787]

2011

KUNAVER, Matjaž, JASIUKAITYTE, Edita, ČUK, Nataša, KATRAŠNIK, Tomaž, RODMAN OPREŠNIK, Samuel, SELJAK, Tine. Biomass waste – an energy source. V: 4th International Congress on Energy and Environment Engineering and Management, Mérida, Spain, 25-27 May 2011 : IVCIIEM 2011. Mérida: School of Industrial Engineering of the Extremadura University, 2011, 5 str., ilustr. [COBISS.SI-ID 4666906]

WURZENBERGER, Johann C., BARDUBITZKI, Sophie, HEINZLE, Roman, KATRAŠNIK, Tomaž. Physical based real time system simulation : model and application workflow. V: The automobile in the second decade : sharing all energy solutions : final programme and exhibition catalogue. València: Universitat Politècnica, 2011, str. A32-1-A32-10. [COBISS.SI-ID 11912475]

WURZENBERGER, Johann C., BARDUBITZKI, Sophie, BARTSCH, Peter, KATRAŠNIK, Tomaž. Real time capable pollutant formation and exhaust aftertreatment modeling-HSDI diesel engine simulation. V: Modeling of SI and Diesel Engines, April 12-14, 2011, Detroit, Michigan, (SP, 2314). Warrendale: Society of Automotive Engineers, 2011, str. 397-418. [COBISS.SI-ID 11910939]

KRAMMER, Johann, WURZENBERGER, Johann C., BARDUBITZKI, Sophie, KATRAŠNIK, Tomaž. Real time capable, system level simulation with integrated pollutant formation and exhaust aftertreatment modelling. V: JSAE Annual Congress, Pacifico Yokohama, 18-20 May 2011. Proceedings. [S. l.]: Society of Automotive Engineers of Japan, 2011, str. 19-22. http://www.bookpark.ne.jp/cm/jsae/particulars_e.asp?content_id=JSAE-20115080-PDF. [COBISS.SI-ID 12118811]

KUNAVER, Matjaž, JASIUKAITYTE, Edita, ČUK, Nataša, MEDVED, Sergej, RODMAN OPREŠNIK, Samuel, KATRAŠNIK, Tomaž. Biomass waste – a source of raw materials and new energy source. V: World Renewable Energy Congress 2011 – Sweden, Linköping 8-13 May 2011. Linköping: University, 2011, str. [1-8]. [COBISS.SI-ID 11839259]

2010

WURZENBERGER, Johann C., BARTSCH, Peter, KATRAŠNIK, Tomaž. Real time capable system simulation : a fully integrated engine gas path and vehicle model. V: Diesel engines = Motorisation diesel : facing the competitiveness challenges = face au défi de la compétitivite : international conference and exposition, 26-27 May 2010, Rouen, France = congrés international et exposition, 26-27 Mai 2010, Rouen, France : proceedings. [S. l.]: SIA, 2010, str. 1-10, ilustr. [COBISS.SI-ID 11413531]

KATRAŠNIK, Tomaž, WURZENBERGER, Johann C. Application of crank-angle resolved real-time engine simulation to model drive cycle performance. V: Energija i okoliš 2010 : međunarodni kongres = Energy and the Environment 2010 : international congress. Rijeka; Le Bourget du Lac: Hrvatski savez za sunčevo energiju: = Croatian Solar Energy Association: GRETh, 2010, str. 231-240, ilustr. [COBISS.SI-ID 11611931]

SENČIĆ, Tomislav, MEDICA, Vladimir, KATRAŠNIK, Tomaž. Simulacija strategija smanjenja emisija iz sporohodnog brodskog motora. V: Energija i okoliš 2010 : međunarodni kongres = Energy and the Environment 2010 : international congress. Rijeka; Le Bourget du Lac: Hrvatski savez za sunčevo energiju: = Croatian Solar Energy Association: GRETh, 2010, str. 409-419, ilustr. [COBISS.SI-ID 11612699]

KATRAŠNIK, Tomaž, WURZENBERGER, Johann C. Development of future powertrains by simulation tools. V: Transport Research Arena, Europe 2010, Brussels, Belgium, June 7-10, 2010. Greener, safer and smarter road transport for Europe : proceedings. Brussels: [s. n.], 2010, str. 1-8. [COBISS.SI-ID 11414043]

WURZENBERGER, Johann C., BARTSCH, Peter, KATRAŠNIK, Tomaž. Crank-angle resolved real-time capable engine and vehicle simulation – fuel consumption and driving performance. V: TILLOCK, Brad R. (ur.). Modeling of SI and diesel engines, 2010, (SP, 2281). Warrendale: SAE International, 2010, str. 1-16, doi: 10.4271/2010-01-0784. [COBISS.SI-ID 11386395]

KRAMMER, Johann, WURZENBERGER, Johann C., BARTSCH, Peter, KATRAŠNIK, Tomaž. Crank-angle resolved real-time engine models for office applications. V: JSAE Annual Congress, Pacifico Yokohama, 18-20 May 2010. Proceedings. [S. l.]: Society of Automotive Engineers of Japan, 2010, str. [1-6].http://www.bookpark.ne.jp/cm/jsae/particulars_e.asp?content_id=JSAE-20105431-B01. [COBISS.SI-ID 11782683]

2009

WURZENBERGER, Johann C., KATRAŠNIK, Tomaž, et al. Crank-angle resolved real-time engine simulation – integrated simulation tool chain from office to testbed. V: Electronic engine controls, 2009, (SP, 2248). Warrendale, PA: SAE International, 2009, str. 11-22. [COBISS.SI-ID 11002139]

KATRAŠNIK, Tomaž. Energy conversion efficiency of parallel and series hybrid electric heavy-duty vehicles. V: 12th European Automotive Congress, Bratislava, Slovakia, June 29-1 July, 2009. Europe in the second century of auto-mobility : congress proceedings. Bratislava: [s. n.], 2009, 22 str. [COBISS.SI-ID 10984731]

KATRAŠNIK, Tomaž. Energy conversion efficiency of hybrid electric heavy-duty vehicles. V: SAE 2009. Warrendale: SAE International, 2009, [21] str., ilustr. [COBISS.SI-ID 11029787]

KATRAŠNIK, Tomaž. Fuel economy of hybrid electric heavy-duty vehicles. V: 9. konferenca in razstava Inovativna avtomobilska tehnologija = 9th conference and exhibition Innovative Automotive Technology IAT’09, Nova Gorica, Slovenija, 23.-24. april 2009. FAJDIGA, Matija (ur.), KLEMENC, Jernej (ur.), TRENC, Ferdinand (ur.). Zbornik referatov = Proceedings. Ljubljana: Fakulteta za strojništvo, LAVEK, cop. 2009, str. 107-118, ilustr. [COBISS.SI-ID 10924315]

RODMAN OPREŠNIK, Samuel, TRENC, Ferdinand, KATRAŠNIK, Tomaž. Določitev voznih karakteristik motorja ter emisij škodljivih izpušnih plinov med vožnjo mestnega zglobnega avtobusa. V: 9. konferenca in razstava Inovativna avtomobilska tehnologija = 9th conference and exhibition Innovative Automotive Technology IAT’09, Nova Gorica, Slovenija, 23.-24. april 2009. FAJDIGA, Matija (ur.), KLEMENC, Jernej (ur.), TRENC, Ferdinand (ur.). Zbornik referatov = Proceedings. Ljubljana: Fakulteta za strojništvo, LAVEK, cop. 2009, str. 219-227, ilustr. [COBISS.SI-ID 10924571]

KATRAŠNIK, Tomaž, TRENC, Ferdinand, RODMAN OPREŠNIK, Samuel, IVANJKO, Štefan. Medium term projection of energy consumption and transport activity in Slovenia. V: DUBOKA, Čedomir (ur.). Automotive engineering for improved safety : proceedings, (SP, 0901). Belgrade: Yugoslav Society of Automotive Engineers, 2009, 11 str., ilustr. [COBISS.SI-ID 10915355]

2008

KATRAŠNIK, Tomaž. Energy conversion in hybrid powertrains. V: XXI znanstveni skup o energiji i zaštiti okoliša, Opatija, Croatia, October 22-24, 2008. FRANKOVIĆ, Bernard (ur.). Međunarodni kongres Energija i okoliš 2008 = International Congress Energy and the Environment 2008. Rijeka: Hrvatski savez za sunčevu energiju, 2008, vol. 1, str. 127-138. [COBISS.SI-ID 10711067]

2007

KATRAŠNIK, Tomaž, TRENC, Ferdinand, RODMAN OPREŠNIK, Samuel. Energy conversion efficiency of parallel and series hybrid powertrains. V: XXI Naučno-stručni skup Nauka i motorna vozila = XXI International Conference with Exibition Science and Motor Vehicles, Beograd, 23-24 April 2007. DUBOKA, Čedomir (ur.). Automotive Engineering for Improved Safety : proceedings. Beograd: Jugoslovensko društvo za motore JUMV, 2007, 18 str. [COBISS.SI-ID 10002715]

KATRAŠNIK, Tomaž, TRENC, Ferdinand, RODMAN OPREŠNIK, Samuel. Study on the energy conversion efficiency of hybrid powertrains. V: 8. konferenca in razstava Inovativna avtomobilska tehnologija IAT’07, Rogla Slovenija, 10.-11. maj 2007. FAJDIGA, Matija (ur.), et al. Zbornik referatov = Conference proceedings. Ljubljana: ULJ-FS-LAVEK, cop. 2007, str. 105-114. [COBISS.SI-ID 10011419]

RODMAN OPREŠNIK, Samuel, KATRAŠNIK, Tomaž, TRENC, Ferdinand, MEHLE, Tomaž, ORBANIĆ, Petar. Razvoj preizkuševališča za preizkušanje delov izpušnih sistemov = Development of testing machine for testing of parts of exhaust systems. V: 8. konferenca in razstava Inovativna avtomobilska tehnologija IAT’07, Rogla Slovenija, 10.-11. maj 2007. FAJDIGA, Matija (ur.), et al. Zbornik referatov = Conference proceedings. Ljubljana: ULJ-FS-LAVEK, cop. 2007, str. 333-341. [COBISS.SI-ID 10011675]

RODMAN OPREŠNIK, Samuel, KATRAŠNIK, Tomaž, TRENC, Ferdinand, ORBANIĆ, Petar. Meritve temperaturnega polja izpušnega zbiralnika na preizkuševališču za preizkušanje delov izpušnih sistemov. V: Cimosov forum : 3. zbornik referatov, 16. november 2007. Koper: Cimos, 2007, str. 180-185. [COBISS.SI-ID 10321179]

2006

RODMAN OPREŠNIK, Samuel, KATRAŠNIK, Tomaž, TRENC, Ferdinand, ORBANIĆ, Petar. Razvoj zgorevalne komore za generacijo izpušnih plinov, namenjenih preizkušanju temperaturno močno obremenjenih preizkušancev. V: ORBANIĆ, Petar (ur.). Dan raziskav : 2. zbornik referatov, Koper, 17. november 2006. Koper: Cimos, cop. 2006, str. 273-275. [COBISS.SI-ID 9733915]

KATRAŠNIK, Tomaž. Analysis of fuel consumption reduction due to powertrain hybridization and downsizing of ICE. V: 2006 SAE Powertrain [and] Fluid Systems, Conference and Exhibition, Toronto, Canada, October 16-19, 2006. Proceedings. [S. l.]: Omnipress, cop. 2006, 19 str. [COBISS.SI-ID 9687067]

BAJCAR, Tom, ŠIROK, Brane, HOČEVAR, Marko, TRENC, Ferdinand. Heat transfer influenced by turbulent airflow inside an axially rotating diffuser. V: Conference on Turbulence and Interactions, TI 2006, Porquerolles, France, 29 May – 2 June 2006 : proceedings. [s.n.]: [S.l.], 2006, [4] f. [COBISS.SI-ID 9373979]

2005

KATRAŠNIK, Tomaž, RODMAN OPREŠNIK, Samuel, TRENC, Ferdinand, MEDICA, Vladimir. Parametric study on dynamic response improvement of a turbocharged diesel engine by electric assist system. V: 10th EAEC European Automotive Congress in association with the 20th International Conference “Science and Motor Vehicles 2005”, Beograd, Serbia & Montenegro, 30th May – 1 June, 2005. DUBOKA, Čedomir (ur.). Cooperative European Automotive Engineering. Belgrade: Yugoslav Society of Automotive Engineers, JUMV, 2005, str. EN04-1 – EN04-13. [COBISS.SI-ID 8250139]

KATRAŠNIK, Tomaž. Analysis of the dynamic response improvement of turbocharged diesel engine driven A.C. generating sets using electric assisting systems. V: Conference on Transient Processes in Internal Combustion Engines and Automotive Powertrains, Prague, Czech Republic, September 14, 2005. Transients 2005. [S.l.]: [s.n.], 2005, 13 str. [COBISS.SI-ID 8467483]

KATRAŠNIK, Tomaž. Izboljšan algoritem za simulacijo delovanja turbine in kompresorja turbopolnilnika z metodo karakteristik = An improved algorithm for simulating the operation of a supercharged turbineand compressor by a method of characteristics. V: 7. konferenca in razstava Inovativna avtomobilska tehnologija IAT’05 Bled (Slovenija), 21. – 22. april 2005. FAJDIGA, Matija (ur.), KLEMENC, Jernej (ur.), KOSTANJEVEC, Andrej (ur.). Zbornik referatov, (IAT, ISSN 1408-1679, Inovativna avtomobilska tehnologija). Ljubljana: ULJ-FS-LAVEK: ZSIS-SVM, 2005, str. 195-202. [COBISS.SI-ID 8210459]

TRENC, Ferdinand, BIZJAN, Frančišek, RODMAN OPREŠNIK, Samuel, KATRAŠNIK, Tomaž. Razvoj preizkusne postaje za preizkušanje turbopuhal in izpušnih zbiralnikov motorjev Cimos d.d. V: 1. Zbornik referatov , Koper, 18. november 2005 : dan raziskav. Koper: CIMOS avtomobilska industrija d.d., 2005, str. 31-33. [COBISS.SI-ID 8695835]

2004

KATRAŠNIK, Tomaž, RODMAN OPREŠNIK, Samuel, TRENC, Ferdinand, ŠKIFIĆ, Nedeljko. A new criterion to determine the start of combustion in diesel engine. V: 2004 Fall Technical Conference of the ASME Internal Combustion Engine Division, October 24-26, 2004, Long Beach, California, USA. ICEF2004. [s.l.]: ASME, 2004, iCF2004-830, 7 str. [COBISS.SI-ID 7659803]

KATRAŠNIK, Tomaž, TRENC, Ferdinand. Izboljšana simetrična shema zmanjšanja totalne vibracije = Improved symmetric total variation diminishing scheme. V: Kuhljevi dnevi 2004, Otočec, 30. september – 1. oktober 2004. KORELC, Jože (ur.), ZUPAN, Dejan (ur.). Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2004, str. 141-148. [COBISS.SI-ID 7566107]

BOMBAČ, Andrej, RODMAN OPREŠNIK, Samuel, ŠIROK, Brane, ŽUN, Iztok. Hitrosti kapljevine pri mešanju s turbinskim mešalom v posodi kvadratastega preseka = Liquid velocities in a square tank stirred with Rushton impeller. V: Kuhljevi dnevi 2004, Otočec, 30. september – 1. oktober 2004. KORELC, Jože (ur.), ZUPAN, Dejan (ur.). Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2004, str. 52-58. [COBISS.SI-ID 7564827]

TRENC, Ferdinand, BIZJAN, Frančišek, KATRAŠNIK, Tomaž, RODMAN OPREŠNIK, Samuel. Nove tehnologije za zmanjšanje emisij v prometu. V: GV okoljsko srečanje, 25. november 2004, Ljubljana. Zbornik referatov. Ljubljana: [Gospodarski Vestnik], 2004, 8 str. [COBISS.SI-ID 7749659]

2003

KATRAŠNIK, Tomaž, TRENC, Ferdinand, MEDICA, Vladimir, RODMAN OPREŠNIK, Samuel, BIZJAN, Frančišek. Analiza vpliva električnih podpornih naprav na izboljšanje dinamične karakteristike tlačno polnjenega dizelskega motorja. V: 6. konferenca IAT’03, Koper/Portorož, Slovenija, 24.-25. april 2003. FAJDIGA, Matija (ur.), et al. Zbornik referatov, (IAT, ISSN 1408-1679, Inovativna avtomobilska tehnologija). Ljubljana: ZSITS, SVM: Fakulteta za strojništvo, LAVEK, 2003, str. 127-135. [COBISS.SI-ID 6044699]

BIZJAN, Frančišek, RODMAN OPREŠNIK, Samuel, TRENC, Ferdinand. Merjenje lastnosti motorja med gibanjem vozila. V: 6. konferenca IAT’03, Koper/Portorož, Slovenija, 24.-25. april 2003. FAJDIGA, Matija (ur.), et al. Zbornik referatov, (IAT, ISSN 1408-1679, Inovativna avtomobilska tehnologija). Ljubljana: ZSITS, SVM: Fakulteta za strojništvo, LAVEK, 2003, str. 17-23. [COBISS.SI-ID 6044187]

DOLENC, Anton, TRENC, Ferdinand. Sodobni sistemi za oskrbo z električno energijo na manjših turističnih ladjah. V: 6. konferenca IAT’03, Koper/Portorož, Slovenija, 24.-25. april 2003. FAJDIGA, Matija (ur.), et al. Zbornik referatov, (IAT, ISSN 1408-1679, Inovativna avtomobilska tehnologija). Ljubljana: ZSITS, SVM: Fakulteta za strojništvo, LAVEK, 2003, str. 49-54. [COBISS.SI-ID 6044443]

2002

KERN, Igor, RUS, Tomaž, BAJCAR, Tom, ŠIROK, Brane, TRENC, Ferdinand. Simultaneous study of pressure pulsations and structural fluctuations of a cavitated vortex core in the draft tube of a Francis turbine. V: 2nd International Symposium on Quantification of Visualized Processes in Fluid Dynamics ISQVPFD’ 2002, Bled, Slovenia, February 4-5, 2002. ŠIROK, Brane (ur.), HOČEVAR, Marko (ur.). CD Rom proceedings. Ljubljana: Turboinstitut: Faculty of Mechanical Engineering; Hertfordshire: University, 2002, str. 38-45. [COBISS.SI-ID 4951579]

BAJCAR, Tom, ŠIROK, Brane, TRENC, Ferdinand, JOŠT, Dragica. Analiza kinematike toka v rotirajočem difuzorju = Analysis of flow kinematics in a rotating diffuser. V: Kuhljevi dnevi ’02, Ribno pri Bledu, 26.-27. september 2002. ŠKERGET, Leopold (ur.), MARN, Jure (ur.). Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2002, str. 251-258. [COBISS.SI-ID 5373211]

GOLJA, Petra, EIKEN, Ola, RODMAN OPREŠNIK, Samuel, ŠIROK, Brane, MEKJAVIĆ, Igor B. Core temperature circadian rhythm during 35 days horizontal bed rest : presented at 23rd Annual Gravitational Physiology meeting, Stockholm, Sweden, June 2-7, 2002. Journal of gravitational physiology, ISSN 1077-9248, 2002, vol. 9, str. 187-188. [COBISS.SI-ID 17305895]

KACIN, Alan, MEKJAVIĆ, Igor B., RODMAN OPREŠNIK, Samuel, KOLEGARD, Roger, EIKEN, Ola. Influence of active recovery following prolonged bed rest on the static exercise pressor response. V: ELMANN-LARSON, Benny (ur.), et al. Proceedings of the 23rd Annual Gravitational Physiology Meeting, Stockholm, Sweden, June 2-7, 2002, (Journal of gravitational physiology, ISSN 1077-9248, Vol. 9, no. 1). [El Cerrito]: Galileo Foundation, 2002, no. 1, vol. 9, str. 91-92. [COBISS.SI-ID 17305639]

KACIN, Alan, MEKJAVIĆ, Igor B., RODMAN OPREŠNIK, Samuel, KOLEGARD, Roger, EIKEN, Ola. Influence of active recovery following prolonged bed rest on the static exercise pressor response. V: 7th Annual Congress of the European College of Sport Science, Athens, 24-28 July, 2002. KOSKOLOU, Maria (ur.), GELADAS, Nickos (ur.), KLISSOURAS, Vassilis (ur.). Proceedings. Athens: European College of Sport Science, 2002, vol. 1, str. 110. [COBISS.SI-ID 16890663]

2001

KATRAŠNIK, Tomaž, TRENC, Ferdinand, RODMAN OPREŠNIK, Samuel, HRIBERNIK, Aleš, MEDICA, Vladimir. Improvement of the dynamic characteristic of an automotive engine by a turbocharger assisted by an electric motor. V: WONG, Victor W. (ur.). Proceedings of the 2001 Fall Technical Conference of the ASME Internal Combustion Engine Division : Argonne, Illinois, September 23-26, 2001, (ICE, ISSN 1066-5048, vol. 37). New York, NY: American Society of Mechanical Engineers, cop. 2001, vol. 1, str. 45-50. [COBISS.SI-ID 4658971]

HRIBERNIK, Aleš, BOMBEK, Gorazd, TRENC, Ferdinand. Investigation of acceleration of turbocharged diesel engine. V: WONG, Victor W. (ur.). Proceedings of the 2001 Fall Technical Conference of the ASME Internal Combustion Engine Division : Argonne, Illinois, September 23-26, 2001, (ICE, ISSN 1066-5048, vol. 37). New York, NY: American Society of Mechanical Engineers, cop. 2001, vol. 3, str. 51-56. [COBISS.SI-ID 4659227]

BIZJAN, Frančišek, PAVLETIČ, Radislav, TRENC, Ferdinand. Studies of the two-stroke engine. V: 1st International Symposium “Retracing the Puch tracks”, Ptuj, Slovenia, September 2001. KEGL, Breda (ur.), PEHAN, Stanislav (ur.). Retracing the Puch track. Maribor: University, 2001, str. 132-139. [COBISS.SI-ID 4705819]

KERN, Igor, RUS, Tomaž, BAJCAR, Tom, ŠIROK, Brane, TRENC, Ferdinand. Simultana študija tlačnih pulzacij in strukturnih fluktuacij kavitacijskega vrtinca v sesalni cevi Francisove turbine. V: Kuhljevi dnevi ’01, Portorož, 27.-28. september 2001. ŠKERGET, Leopold (ur.). Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 2001, str. 241-248. [COBISS.SI-ID 4661275]

BIZJAN, Frančišek, RODMAN OPREŠNIK, Samuel. Razvoj motorja za razred Supersport = [Development of the Supersport – class motorcycle. V: 5. konferenca IAT’01, Ljubljana, Slovenija, 5.-6. april 2001. TRENC, Ferdinand (ur.), FAJDIGA, Matija (ur.), NAGODE, Marko (ur.). Zbornik referatov, (IAT, ISSN 1408-1679, Inovativna avtomobilska tehnologija). Ljubljana: Zveza strojnih inženirjev in tehnikov Slovenije, SVM: Fakulteta za strojništvo, LAVEK, 2001, str. 15-22 (IAT01 1A02). [COBISS.SI-ID 4314395]

ŠIROK, Brane, TRENC, Ferdinand, NOVAK, Matej, JERE, Franc. Redesign and flow analysis of an engine cooling fan for a combat vehicle. V: Nauka i motorna vozila NMV ’01 = Science and Motor Vehicles ’01, Belgrade, Yugoslavia, May 28-30, 2001. DUBOKA, Čedomir (ur.), TODOROVIĆ, Jovan (ur.). Automotive engineering for improved safety, (JUMV-SP, 0101). Belgrade: Yugoslav Society of Automotive Engineers, 2001, str. 105-110. [COBISS.SI-ID 4444955]

2000

ŠIROK, Brane, TRENC, Ferdinand, NOVAK, Matej, JERE, Franc. Analysis of the air-flow in the radial engine cooling fan of a combat vehicle. V: 1st International Symposium on Quantification of Visualized Processes in Fluid Dynamics ISQVPFD’ 2000, Bled, Slovenia, April 3-4, 2000. Proceedings. Ljubljana: Faculty of Mechanical Engineering, 2000, str. 71-79. [COBISS.SI-ID 3608603]

1999

TRENC, Ferdinand, BIZJAN, Frančišek, ŠIROK, Brane, HRIBERNIK, Aleš. Influence of the exhaust system design on scavenging characteristic and emissions of a 4-cylinder supercharged engine. V: BELL, Stuart R. (ur.). Proceedings of the 1999 Fall Technical Conference of the ASME Internal Combustion Engine Division : Ann Arbor, Michigan, October 16-20, 1999, (ICE, ISSN 1066-5048, vol. 33). New York, NY: American Society of Mechanical Engineers, 1999, vol. 1, str. 93-99 (paper no. 99-ICE-210). [COBISS.SI-ID 3338523]

1998

TRENC, Ferdinand, ČER, Matej, BIZJAN, Frančišek, HRIBERNIK, Aleš. Determination of the realistic turbocharger efficiency with pulsating gas-flow compared on a 4-cylinder engine. 98-GT-358. V: ASME Turbo Expo ’98. Stockholm, Sweden, June 2-5, 1998, str. 95-100. [COBISS.SI-ID 2677787]

1997

TRENC, Ferdinand, BIZJAN, Frančišek, HRIBERNIK, Aleš. Influence of the exhaust system on performance of a 4-cylinder supercharged engine. V: UZKAN, Teoman (ur.). Proceedings of the 19th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division “Predictive Engine Design, Validation and Experiment”, Madison, Wisconsin, September 28 – October 1, 1997 : Madison, Wisconsin, September 28 – October 1, 1997, “Predictive engine design, validation and experiment”, (ICE, ISSN 1066-5048, vol. 29). New York, NY: American Society of Mechanical Engineers, cop. 1997, vol. 1, str. 95-100 (paper no. 97-ICE-44). [COBISS.SI-ID 2281243]

ŠUBIC, Jaka, ČUDINA, Mirko, TRENC, Ferdinand, ŽELEŽIČ, Erika. Vpliv načina hlajenja valjev na emisijo hrupa. V: Inovativna avtomobilska tehnologija IAT’97, Novo mesto, 17.-18. april 1997. KUHELJ, Anton (ur.), FAJDIGA, Matija (ur.), TRENC, Ferdinand (ur.). Zbornik referatov, (IAT, ISSN 1408-1679). Ljubljana: Zveza strojnih inženirjev in tehnikov Slovenije, Skupina za vozila in motorje, 1997, str. 19-27. [COBISS.SI-ID 2272027]

1996

DELIĆ, Marjan, ŠKERGET, Leopold, TRENC, Ferdinand. Flow phenomena of laminar split-oil flow in a curved horizontal channel. V: 4th International conference on advanced computational methods in heat transfer, 1996, Udine. WROBEL, L.C. (ur.). Advanced computational methods in heat transfer. 4. Southampton: Computational mechanics publications, cop. 1996, str. 115-124. [COBISS.SI-ID 2292758]

TRENC, Ferdinand, DELIĆ, Marjan, ŠKERGET, Leopold. State of the art and possible solutions for efficient cylinder cooling. V: FISITA 96, Praha, June 17 to 21, 1996. Engineering challenge – human friendly vehicles. Praha: CSAT, 1996, str. 1-9. [COBISS.SI-ID 1856283]

RODMAN OPREŠNIK, Samuel, DELIĆ, Marjan, OBERDANK, Kazimir, TRENC, Ferdinand, ŠKERGET, Leopold. Primerjava eksperimentalnih in numeričnih rezultatov analize toka olja v ukrivljenem kanalu = Comparison of experimental and numerical results analysis of the oil flow in a curved channel. V: Kuhljevi dnevi ’96, Gozd Martuljek, 19.-20. september 1996. ŠTOK, Boris (ur.). Zbornik del. Ljubljana: Slovensko društvo za mehaniko, 1996, str. 169-176. [COBISS.SI-ID 2212374]

TRENC, Ferdinand, RODMAN OPREŠNIK, Samuel, ŠKERGET, Leopold, DELIĆ, Marjan. Optimum cylinder cooling for advanced diesel engines. V: 18th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division, Fairborn, Ohio, October 20-23, 1996. CATON, Jerald A. (ur.). Advancements in engine design and applications, Advanced designs and operations. Vol. 1 : proceedings of the 18th Annual Fall Technical Conference of the ASME Internal Combustion Engine Division, Fairborn, Ohio, October 20-23, 1996. New York: ASME, 1996, str. 27-34. [COBISS.SI-ID 2292246]

1995

TRENC, Ferdinand, PRIMOŽIČ, Jože, VUKSANOVIČ, Božidar. Analiza učinkovitosti kombiniranega hlajenja na valjih sodobnih dizelskih motorjev = Efficiency Analisis of the Combined Air-Oil Cooled I.C. Engine Cylinder. V: IAT’95, Radenci, Slovenija, 6.-7. april 1995. FAJDIGA, Matija (ur.), KOGLER, Robert (ur.), TRENC, Ferdinand (ur.). Zbornik referatov, (IAT, ISSN 1408-1679). [Ljubljana]: Zveza strojnih inženirjev in tehnikov Slovenije, Skupina za vozila in motorje, 1995, str. 211-218. [COBISS.SI-ID 766482]

PAVLETIČ, Radislav, TRENC, Ferdinand. Obvladovanje toplotnih obremenitev batnega motorja z notranjim zgorevanjem = How to owercom thermal stress in an I. C. engine. V: IAT’95, Radenci, Slovenija, 6.-7. april 1995. FAJDIGA, Matija (ur.), KOGLER, Robert (ur.), TRENC, Ferdinand (ur.). Zbornik referatov, (IAT, ISSN 1408-1679). [Ljubljana]: Zveza strojnih inženirjev in tehnikov Slovenije, Skupina za vozila in motorje, 1995, str. 227-234. [COBISS.SI-ID 766738]

DELIĆ, Marjan, ŠKERGET, Leopold, ŽAGAR, Ivan, TRENC, Ferdinand. Termo-hidravlične razmere laminarnega toka tekočine v ozkih kanalih. V: IAT’95, Radenci, Slovenija, 6.-7. april 1995. FAJDIGA, Matija (ur.), KOGLER, Robert (ur.), TRENC, Ferdinand (ur.). Zbornik referatov, (IAT, ISSN 1408-1679). [Ljubljana]: Zveza strojnih inženirjev in tehnikov Slovenije, Skupina za vozila in motorje, 1995, str. 243-250. [COBISS.SI-ID 7280644]

1994

TRENC, Ferdinand, VOLF, Valter, ŠKERGET, Leopold. Further Development of the Combined Air-Oil Cooling on a Supercharged Diesel Engine. V: Automobile in harmony with human society, (Technical Papers, 945061-945093). 1st ed. Beijing: International Academic Publishers, 1994, str. 1-6. [COBISS.SI-ID 1844507]

DELIĆ, Marjan, ŠKERGET, Leopold, ŽAGAR, Ivan, TRENC, Ferdinand. Numerična analiza termo-hidravličnih pogojev v ozkih ukrivljenih kanalih. V: Kuhljevi dnevi ’94, Šmarješke Toplice, 22. – 23. september 1994. OBLAK, Maks (ur.). Zbornik del. V Ljubljani: Slovensko društvo za mehaniko, 1994, str. 67-74. [COBISS.SI-ID 6441988]

1993

ŠELIH, Jana, DAMJANIĆ, Frano, TRENC, Ferdinand, PAVLETIČ, Radislav. Thermal analysis of an air cooled internal combustion engine cylinder liner. V: Numerical methods in thermal problems : proceedings of the Eighth International conference held in Swansea, Wales, on July 12-16th, 1993. Vol. VIII, Part 1. Swansea: Pineridge Press, 1993, str. 1334-1345. [COBISS.SI-ID 1894427]

TRENC, Ferdinand, PRIMOŽIČ, Jože, VOLF, Valter. Kombinirano hlajenje TAM-ovih prototipnih motorjev. V: Konferenca Inovativna avtomobilska tehnologija IAT’93, Ljubljana, Slovenija, 15.-16. april 1993. FAJDIGA, Matija (ur.), TRENC, Ferdinand (ur.). Zbornik referatov, (IAT, ISSN 1408-1679, Inovativna avtomobilska tehnologija). [Ljubljana]: Zveza strojnih inženirjev in tehnikov, Skupina za motorje in vozila, 1993, str. 123-131. [COBISS.SI-ID 753682]

1992

TRENC, Ferdinand, PAVLETIČ, Radislav. Combined Air-Oil Cooling on a Supercharged TC & IC TAM Diesel Engine. V: CHRISMAN, Bruce (ur.). New developments in off-highway engines : presented at the 14th annual fall technical conference of the ASME internal combustion engine division, Waterloo, Iowa, October 4-7, 1992, (ICE, Vol. 18). New York: ASME, 1992, str. 25-31. [COBISS.SI-ID 1792283]

1991

ZGONIK, Miran, BIZJAN, Frančišek, VIČIČ, Rihard, TRENC, Ferdinand, VOLF, Valter. Combined air-oil cooling of the cylinder with oil chanell. SAE technical paper series, ISSN 0148-7191, 1991, paper 910201, 7 str. [COBISS.SI-ID 2675483]

TRENC, Ferdinand, PETROVIČ, Stojan, VENTURINI, Dušan, POPOVIČ, Vladan. Motor vehicle exhaust emissions legislation policy in Yugoslavia. SAE technical paper series, ISSN 0148-7191, 1991, paper 912427, 15 str. [COBISS.SI-ID 2675739]

1990

ČUDINA, Mirko, TRENC, Ferdinand, STERŽAJ, Milan. Noise analysis of the engine cooling fan. V: International Conference on Noise Control Engineering, Gothenburg, Sweden, August 13-15, 1990. JONASSON, H. G. (ur.). Inter-Noise 90 : proceedings, Science for silence. Poughkeepsie, NY: Noise Control Engineering, cop. 1990, vol. 1, str. 501-504. [COBISS.SI-ID 2677531]

PAVLETIČ, Radislav, SINYAVSKIY, V.V., BIZJAN, Frančišek, LESKOVŠEK, D. I.C. Engine having performance parameters preferential for automotive operating conditions. V: Comodia 90 : proceedings of the international symposium on diagnostics and modeling of combustion in internal combustion engines, september 3-5, 1990, Kyoto, Japan. Tokyo: The Japan Society of Mechanical Engineers, 1990, str. 185-191. [COBISS.SI-ID 3568667]

PAVLETIČ, Radislav, SINYAVSKIY, Vladimir V., BIZJAN, Frančišek. S.I. version engine with desintegrated process – expectancies based on model computations and today engine experiences. SAE technical paper series, ISSN 0148-7191, 1990, paper 900230, str. 1-8. [COBISS.SI-ID 3565851]

1989

ČUDINA, Mirko, TRENC, Ferdinand. Optimisation of the engine cooling fan with regard to its performance and noise. V: PRAVICA, Petar (ur.), DRAKULIĆ, Gordana (ur.). 13. International Congress on Acoustics = 13. Congres International d`Acoustique = 13. Internationaler Kongress für Akustik : [Belgrade, 24-31 August 1989]. Beograd: Sava Centar, 1989, vol. 3, str. 271-274. [COBISS.SI-ID 2676507]

ČUDINA, Mirko, TRENC, Ferdinand, STERŽAJ, Milan. Noise control of the engine cooling fan. V: MALING, George C. (ur.). Inter-Noise 89 : Newport Beach, California, 1989, December 4-6, Engineering for environmental noise control, (Proceedings of the International Conference on Noise Control Engineering, ISSN 0105-175X). New York: Noise Control Foundation, 1989, vol. 1, str. 139-142. [COBISS.SI-ID 2677019]

1988

ČERNEJ, Anton, DOBOVIŠEK, Želimir, FILIPOVIČ, Ivan, VOLF, Valter, TRENC, Ferdinand, MIKLUŠ, Ivo, KEGL, Breda. Tune up time for fuel injection. V: KONES ’88, Poznań – Błażejewko, 6-9 grudna 1988. Elementy specjalistyczne tłokowych silnikóv spalinowych o podwyższonych parametrach techniczno-eksploatacyjnych. Poznań: Politechnika poznańska [etc.], 1988, str. 35-55. [COBISS.SI-ID 4525572]

ČERNEJ, Anton, DOBOVIŠEK, Želimir, KEGL, Breda, MIKLUŠ, Ivo, TRENC, Ferdinand, VOLF, Valter, FILIPOVIČ, Ivan. Limitations of conventional fuel injection systems (CFIS). V: 6. Medzinarodne Symposium, Vysoke Tatry, Štrbske Pleso, 19.-21. april 1988. Motor Sympo 88. Vol. 2. [S. l.: s. n.], 1988, str. 403-410. [COBISS.SI-ID 960260]

PREBIL, Ivan, PAVLETIČ, Radislav. Termodinamična analiza delovnega procesa v valju dizelskega motorja : ime programa “ANALPRO”. V: Katalog računarskih programa prikazanih na skupu PRO AUTO, Kragujevac, 9-11. novembra 1988 godine. Kragujevac: Jugoslovensko društvo za motore i vozila, JUMV, 1988, str. 18. [COBISS.SI-ID 3236379]

PREBIL, Ivan, PAVLETIČ, Radislav. Vrednotenje delovnega procesa v valju dizelskega motorja : ime programa “VREDPRO”. V: Katalog računarskih programa prikazanih na skupu PRO AUTO, Kragujevac, 9-11. novembra 1988 godine. Kragujevac: Jugoslovensko društvo za motore i vozila, JUMV, 1988, str. 19. [COBISS.SI-ID 3236635]

PREBIL, Ivan, PAVLETIČ, Radislav. Prednapeti dinamično obremenjeni vijak : ime programa “VIJPRO”. V: Katalog računarskih programa prikazanih na skupu PRO AUTO, Kragujevac, 9-11. novembra 1988 godine. Kragujevac: Jugoslovensko društvo za motore i vozila, JUMV, 1988, str. 20. [COBISS.SI-ID 3236891]

1987

TRENC, Ferdinand, ČERNEJ, Anton, VOLF, Valter. Mogućnosti daljnjeg povećavanja snage vazdušno hlađenih dizelskih motora TAM-ovog razvojnog programa. V: Nauka i motorna vozila ’87 = Science and motor vehicles ’87, Belgrade, Yugoslavia, April 1-3, 1987. Zbornik radova = Proceedings. Beograd: Jugoslovensko Društvo za motore i vozila (JUMV), 1987, 7 str. (871286). [COBISS.SI-ID 3006491]

PAVLETIČ, Radislav, PREBIL, Ivan. Klipni motor SUS sa totalnim iskorištenjem eksergije. V: Nauka i motorna vozila ’87 = Science and motor vehicles ’87, Belgrade, Yugoslavia, April 1-3, 1987. Zbornik radova = Proceedings. Beograd: Jugoslovensko Društvo za motore i vozila (JUMV), 1987, 5 str. (871205). [COBISS.SI-ID 3007771]

1986

TRENC, Ferdinand, VOLF, Valter, VUKSANOVIČ, Božidar. Numerical method of matching the turbocharger to a diesel engine. V: 21st International Automobile Technical Congress FISITA, Belgrade, Yugoslavia, 2.-6. June 1986. JANIĆIJEVIĆ, Nenad (ur.). Proceedings = Rapport = Vorträge. [Beograd]: Yugoslav Society of Automotive Engineers, 1986, vol. 1, str. 173-176 (865024). [COBISS.SI-ID 2953499]

 ZGONIK, Miran, PAVLETIČ, Radislav. The influence of the parameters of state after compression on the diesel radiation. V: 21st International Automobile Technical Congress FISITA, Belgrade, Yugoslavia, 2.-6. June 1986. JANIĆIJEVIĆ, Nenad (ur.). Proceedings = Rapport = Vorträge. [Beograd]: Yugoslav Society of Automotive Engineers, 1986, str. 299-306. [COBISS.SI-ID 181859]

BIZJAN, Frančišek, PAVLETIČ, Radislav. The nozzle location and the shape of its surroundings in the cylinder of small two-stroke engine. SAE technical paper series, ISSN 0148-7191, 1986, paper 860169, 7 str. [COBISS.SI-ID 3720731]

PAVLETIČ, Radislav, PREBIL, Ivan, VUKSANOVIČ, Božidar, ZGONIK, Miran. Construction specialties of regenerative piston internal combustion engines. SAE technical paper series, ISSN 0148-7191, 1986, paper 861193, str. 1-6. [COBISS.SI-ID 3232027]

1985

ČUDINA, Mirko, PAVLETIČ, Radislav. A model method for the evaluation of the scavenging system in a two-stroke engine. SAE technical paper series, ISSN 0148-7191, 1985, paper 850176, str. 1-8. [COBISS.SI-ID 5191451]

PAVLETIČ, Radislav, VUKSANOVIČ, Božidar, PEČJAK, Andrej, ZGONIK, Miran. Regeneration of heat in piston internal combustion engines : pros and cons?. SAE technical paper series, ISSN 0148-7191, 1985, paper 859375, str. 2.748-2.754. [COBISS.SI-ID 715875]

1984

ZAZULA, Stanislav, PAVLETIČ, Radislav, BIZJAN, Frančišek. Two-wheeled vehicle with two-stroke engine and omission of active cycles. SAE technical paper series, ISSN 0148-7191, 1984, paper 841094, str. 1-11. [COBISS.SI-ID 3565339]

BIZJAN, Frančišek. Ubrizgavanje goriva kod dvotaktnih motora male radne zapremine. Motorna vozila, ISSN 0350-1027, 1984, letn. 10, str. 229-235. [COBISS.SI-ID 3566107]

1979

VOLF, Valter, TRENC, Ferdinand. Sistem zgorevanja po postopku “D” kot možna rešitev tudi pri tlačno polnjenih diezelskih motorjih družine FL413FR TAM-ovega proizvodnega programa = “D” combustion process as possible solution also with turbo-charged diesel engines FL 413 FR from TAM production programme. V: 9. Naučno stručni skup Nauka i motorna vozila = 9th Scientific and Professional Gathering Science and Motor Vehicles, Bled, Slovenia, 4.-7. June 1979. ZGONIK, Miran (ur.), HORVAT, Borut (ur.). Saopštenja = Papers. Ljubljana: Jugoslovensko društvo za motore i vozila (JUMV), 1979, i, str. 50-61 (B5-1). [COBISS.SI-ID 2952219]